KN-V90 Waterproof Pool Cover

This product is used as a ready-to-use, single-component resin for insulating cement pools, and if the customer needs it, it can also be used on cement walls and fountains, etc., due to its blue color.

This product is highly resistant to acids and salt stains, resistant to stretching and microcracks, heat and cold, and lightweight. It has great resistance to algae absorption and takes longer to absorb algae than a cement surface. It is easy to apply and is applied to cement surfaces like paint with a brush, roller, or broom. One of its best features is its ability to be easily repaired in the event of a puncture or local damage.

On cement, a cement base primer must be used before using this product. In pools that are block-built and not standard, it is recommended that after applying the cement base primer, two layers of two-component fibrous insulation code (KN-V700) and a layer of mesh be applied, and pool insulation be applied as the final layer on top.

Water-based blue waterproof paint

It is blue and water-based for insulating cement surfaces on swimming pools. It is for cement surfaces and has a long-lasting color.

Advantages characteristics:

100% waterproof

anti uv

Very high adhesion, flexibility and elongation properties

100% waterproof

Facade beauty and an ideal alternative to insulation

Color durability up to more than 5 years

Anti-algae

Flexible

To create a high-quality insulation with a very long lifespan, it is recommended that you first apply a layer of primer for cement foundations, code nj-60, then 2 layers of two-component fiber-filled insulation, code nj-700, and finally use one or two layers of insulation specifically for swimming pools.

Coverage amount:

This product covers 60 to 70 square meters in two layers, depending on the roughness or smoothness of the cement surface.

How to use:

Wash and clean the surface under the work.

Apply one coat to the surface with a brush or roller and allow at least 3 hours for the first coat to dry completely.

Apply another layer over the entire surface of the previous layer.